| |

1988 Ford Ranger 1988 STX Standard Cab Pickup

Repair services & inexpensive new parts for 1988 Ford Ranger 1988 STX Standard Cab Pickup with 2.3L 140Cu. In. l4 GAS SOHC Naturally Aspirated engine.

The 1988 Ford Ranger STX Standard Cab Pickup is a classic compact truck known for its durability and practicality. Equipped with a 2.3L inline-4 GAS SOHC naturally aspirated engine, this model offers a balance between efficiency and performance, making it suitable for everyday driving and light hauling. With its rear-wheel-drive configuration and straightforward design, the Ranger of this era remains a popular choice for those seeking a reliable and easy-to-maintain vehicle.

Common Issues

  • Timing belt wear: Regular inspection and replacement can prevent engine damage.
  • Rust: Check for rust, especially around the wheel wells and undercarriage.
  • Electrical issues: Aging wiring may lead to lighting or starting problems.
  • Fuel pump failure: Symptoms include difficulty starting and loss of power.

Maintenance Tips

  • Change the oil and filter every 3,000 to 5,000 miles to maintain engine health.
  • Inspect the timing belt every 60,000 miles and replace it if necessary.
  • Regularly check and maintain the cooling system to prevent overheating.
  • Lubricate the chassis and suspension components at regular intervals.

Typical Repair/Ownership Cost Ranges

  • Oil change: $30 - $60
  • Timing belt replacement: $300 - $500
  • Brake service: $150 - $300
  • Fuel pump replacement: $200 - $400

Buying Advice

  • Inspect the body for rust, especially in areas prone to corrosion.
  • Check the timing belt history and condition to avoid potential engine issues.
  • Test drive to assess the transmission and suspension performance.
  • Review the vehicle's maintenance records for regular upkeep.

FAQ

How is the fuel efficiency of the 1988 Ford Ranger? The 1988 Ford Ranger with a 2.3L engine typically achieves around 20-25 mpg, depending on driving conditions and maintenance. What kind of oil is recommended for this model? For the 1988 Ford Ranger, it is recommended to use 10W-30 motor oil. How often should the timing belt be replaced? It's advisable to replace the timing belt every 60,000 miles to prevent engine damage. What are the signs of a failing fuel pump? Symptoms include difficulty starting, engine sputtering at high speeds, and a noticeable drop in fuel efficiency. Is the 1988 Ford Ranger suitable for towing? While it can handle light towing, its towing capacity is limited, making it unsuitable for heavy loads. What should I look for in the suspension during a test drive? Listen for any unusual noises and check for excessive bouncing or instability when driving over bumps.

Have Questions about Ford Ranger 1988 STX? Ask the assistant for questions about mileage, performance, repairs, parts, recommended maintenance and more.


Make: Ford
Model: Ranger
Trim: STX Standard Cab Pickup 2-Door
Year: 1988

Quick Info

Fuel: GAS
Aspiration: Naturally Aspirated
Engine Displacement: 2.3L
Engine CC: N/A
Engine CID: 140
Engine Block Type: L
Cylinder Type: SOHC
Cylinders: 4
Drive: RWD
Body Type: Standard Cab Pickup
Doors: 2

Repair services & inexpensive new parts for 1988 Ford Ranger 1988 STX Standard Cab Pickup with 2.3L 140Cu. In. l4 GAS SOHC Naturally Aspirated engine.