| |

1986 Ford Ranger 1986 STX Standard Cab Pickup

Repair services & inexpensive new parts for 1986 Ford Ranger 1986 STX Standard Cab Pickup with 2.9L 177Cu. In. V6 GAS OHV Naturally Aspirated engine.

The 1986 Ford Ranger STX Standard Cab Pickup is a classic American truck, featuring a robust 2.9L V6 engine with an overhead valve (OHV) configuration and a naturally aspirated induction system. Known for its durability, the Ranger offers a rear-wheel-drive setup and a practical two-door standard cab configuration, making it a versatile choice for both work and light recreational use. Despite its age, it remains popular among enthusiasts for its simplicity and reliability, although it may require attentive maintenance to tackle age-related wear and tear.

Common Issues

  • Leaking valve cover gaskets leading to oil leaks.
  • Failure of the ignition control module can cause starting issues.
  • Rust, particularly on the frame and underbody, is common in older models.
  • Fuel pump failures are relatively frequent in high-mileage units.

Maintenance Tips

  • Regularly inspect and replace the valve cover gaskets to prevent oil leaks.
  • Check the ignition system components annually for wear and replace as needed.
  • Perform regular rust checks and treat any affected areas promptly.
  • Change the fuel filter every 15,000 miles to ensure fuel system health.

Typical Repair/Ownership Cost Ranges

  • Valve cover gasket replacement: $100 - $200
  • Ignition control module replacement: $150 - $300
  • Fuel pump replacement: $300 - $500
  • Routine maintenance (oil, filters, etc.): $100 - $250 per visit

Buying Advice

  • Inspect for rust, particularly on the frame and underbody.
  • Test drive to check for smooth transmission operation and absence of unusual noises.
  • Verify the condition of electrical components; ensure all lights and signals work.
  • Request service records to confirm regular maintenance, especially recent component replacements.

FAQ

  • How many miles per gallon does the 1986 Ford Ranger typically achieve? The 1986 Ford Ranger with the 2.9L V6 engine typically achieves around 15-20 mpg, depending on driving conditions and maintenance.
  • What is the towing capacity of this model? The 1986 Ford Ranger has a towing capacity of approximately 2,500 to 3,500 pounds, depending on the configuration and condition.
  • Is the 1986 Ford Ranger STX reliable? With regular maintenance, the 1986 Ford Ranger is considered reliable, though it may require more frequent repairs given its age.
  • What type of oil is recommended for the 2.9L V6 engine? For optimal performance, it is recommended to use SAE 10W-30 engine oil.
  • Does the 1986 Ford Ranger have power steering? Yes, the 1986 Ford Ranger typically comes equipped with power steering.
  • Are parts readily available for this model? While some parts may be harder to find due to the vehicle's age, many are still available through specialty suppliers and aftermarket sources.

Have Questions about Ford Ranger 1986 STX? Ask the assistant for questions about mileage, performance, repairs, parts, recommended maintenance and more.


Make: Ford
Model: Ranger
Trim: STX Standard Cab Pickup 2-Door
Year: 1986

Quick Info

Fuel: GAS
Aspiration: Naturally Aspirated
Engine Displacement: 2.9L
Engine CC: N/A
Engine CID: 177
Engine Block Type: V
Cylinder Type: OHV
Cylinders: 6
Drive: RWD
Body Type: Standard Cab Pickup
Doors: 2

Repair services & inexpensive new parts for 1986 Ford Ranger 1986 STX Standard Cab Pickup with 2.9L 177Cu. In. V6 GAS OHV Naturally Aspirated engine.